Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13605068

- Product Categories
- Friendly Links
Information Name: | Electric plunger pump | Hydraulic Lu (certified) | electric pump |
Published: | 2015-03-14 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | DYS-1 flashlight organic combination of one pump manual pump with an electric pump together, both fast electric oil pump, hand pump another micro feed, you can use flexible interspersed between manual and electric, get two the state can not be achieved when working alone. Fuel tank capacity: 15L, 25L, is also available upon request, special manufacturing motor power: 1.5KW, 2.2KW, 3KW manual hand pump maximum force: 500N electric parts: Working pressure: high pressure and low pressure 0-12Mpa 0-63Mpa work flow : High flow 0.8-4L / min Low flow 6-20L / min Manual: Work pressure: high pressure and low pressure 1Mpa 0-63Mpa work flow: High flow 2.3,6ml / secondary low pressure flow 12.5,45ml / sub DBS series UHP electric pump installation steps first electric pump manufacturers, during the installation of high pressure electric pump, to prevent debris falling into the machine, so that all units should cover the fine hole electric pump, the unit on the anchor bolts buried basis, between the base and the base, with a pair of chocks with calibration. Then, in order to prevent pipeline debris into the high pressure electric pump, installation of new pipelines, pump plastic filter should be installed, which should be greater than the effective cross section of 2 to 3 times the suction pipe section. Finally, take a good pipeline and determine the direction of rotation of the motor after the electric pump plunger, followed by the coupling of the electric pump, and then check it again Fang concentric shaft. In the actual test run after the unit 2 to 3 hours, for a final check, if no adverse phenomenon is considered high pressure electric pump installation qualified. Electric plunger pump | Hydraulic Lu (certified) | electric pump provided by Lu of hydraulic equipment plant in Texas. Texas Lu force hydraulic machinery plant (www.luliyeya.com) is a leader in Dezhou, hydraulic machinery and parts, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Lu Hydraulic leadership with the staff warmly welcome all inquiries negotiations to create Lu hydraulic force a better future. |
Admin>>>
You are the 21112 visitor
Copyright © GuangDong ICP No. 10089450, Texas Lu of hydraulic machinery plant All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 21112 visitor
Copyright © GuangDong ICP No. 10089450, Texas Lu of hydraulic machinery plant All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility